Canon ip6700d printer horizontal lines through every color

#Canon ip6700d printer horizontal lines through every color full
#Canon ip6700d printer horizontal lines through every color Pc

If there is visible damage to the drum or cleaning is not effective you probably need to replace the drum. There are some other rollers involved to feed the paper through the mechanism, give them a wipe too but not likely to be part of the problem. Fluids may damage the drum but if you've decided its otherwise a write-off you could experiment, just make sure that everything is completely dry before reassembly. If there is any visible defect on the drum you can try wiping with a soft tissue. The drum can be rendered useless by a short exposure to sunlight (it's possible that only a small part of the drum has exposed through a slit in the mechanism which would result in patches on the printout).

You may be able to spot and clean the defect but do beware of strong light on the transfer roller, it will degrade it, The surface is sensitive so don't touch or scratch either. If you are getting a periodic repeat of an unwanted mark on the page the image transfer drum is the likely suspect. Always worth a try if print quality is degraded but probably not the solution here. This is used to wipe a wire that carries an electrostatic charge, part of the image transfer mechanism. You may find there's a cleaner (small felt pad) either as part of the printer or part of the drum component. Printers with separate drum & toner tend to be cheaper to run as the transfer roller can last for several toner refills. It's quite common to have an integrated cartridge with toner and transfer drum/roller (often light sensitive green coated metal) in one unit or they may be separate items. The fuser unit can fail and can develop defects that affect the print quality but normally only a consumable on the more expensive models, more often it's a reason to replace the printer. That toner is then transferred to the paper which then goes through the fuser rollers which are heated and 'melt' the toner onto the paper.Р”Вifferent printers have different consumables. Toner is applied to the drum, sticking to those parts where the image will be black. There are 3 main components involved in getting an image onto paper: The image is 'written' to a photoconductive drum (or occasionally a photoconductive plastic ribbon) by a laser (or sometimes by LEDs). In brief: you probably need a replacement photosensitive image transfer drum. This answer is NOT specific to the named laser printer. I guess you've thoroughly checked the paper path and cleaned anything that looked cleanable.

Try a different cable, ensure cable not routed past anything electrically 'noisy'. If you're using the parallel printer port data corruption is another (remote) possibility.

#Canon ip6700d printer horizontal lines through every color full

reset may fix it, otherwise any indication of full memory or memory error? Does the control panel offer a memory test?Р”Р€.

#Canon ip6700d printer horizontal lines through every color Pc

PC software, highly improbable - but can you try a print from another pc, a laptop maybe?Р”Сћ. Release GO when the Attention light stays steady.

do a printer reset - switch of for a couple of mins, power on with the GO button pressed. РІР‚СљWhen you eliminate all other possibilities, what remains, no matter how improbable, is the answer.РІР‚СњР”РЋ.

If a fresh cartridge doesn't help that's eliminated the most likely hardware suspects and doesn't leave much.Р”Р„s Sherlock Holmes said. Looks like it uses an integrated photosensitive drum + toner cartridge.